ICON Health & Fitness PRO-FORM SPORT OLYMPIC RACK XT User Manual page 7

3. Orient one of the Uprights (3) as shown, and
set it over the three M10 x 65mm Carriage Bolts
(16) in the Left Base (2). Attach the Upright with
three M10 Locknuts (17); do not tighten the
Locknuts yet.
Then, attach a Storage Tube (4) to the
Upright (3) with two M10 x 75mm Bolts (20),
two M10 Washers (19), and two M10 Locknuts
(17); insert both Bolts, and then tighten the
Locknuts.
Repeat this step for the other Upright (3) and
the Right Base (1).
See steps 2 and 3. Tighten the six M10 x 20mm
Screws (9) and the six M10 Locknuts (17).
4. Set a Spotter (6) on a set of pegs (A) on the left
Upright (3).
Set the other Spotter (6) on a set of pegs (A)
on the right Upright (3). Make sure that both
Spotters are at the same height.
5. Make sure that all parts are properly tightened before you use the weight rack. The use of all remaining
parts will be explained in ADJUSTMENT on page 8.
3
3
1
4
3
6
A
7
4
3
19
20
17
2
16
6
17
17
16
3
A