Table of Contents
Advertisement
7.5 Setting the TIME DELAY
function
1. Set a heating function and
temperature.
2. Press
starts to flash.
3. Press
for DURATION.
4. Press
5. Press
DURATION.
6. Press
The display shows flashing
7. Press
and press
minutes and then the hours.
The oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time. When the set
time ends, the signal sounds for 2
minutes. The display shows flashing
and the time setting . The oven turns off
automatically.
8. Press a sensor field to stop the
signal.
9. Turn off the oven.
When the Time delay
function is turned on, the
display shows a symbol of
the heating function,
with a dot and
shows which clock function
is on in the Clock / residual
heat display.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
There are 9 automatic programmes. Use
an automatic programme or recipe when
8.1 Automatic programmes
Programme number
1
again and again until
or
to set the minutes
.
or
to set the hours for
.
.
or
to set the END time
. First you set the
. The dot
Programme name
VEGETABLES, TRADITIONAL
7.6 Setting: Minute Minder
1. Press
.
The display shows flashing
2. Press
to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Press
or
MINDER and
4. Press
or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes and the display
shows flashing 00:00 and
5. Press a sensor field to stop the
signal.
7.7 COUNT UP TIMER
1. To reset the Count Up Timer press:
and
at the same time .
2. When the display shows "00:00" the
Count Up Timer starts to count up
again.
you do not have the knowledge or
experience on how to prepare a dish.
The display shows the default cooking
times for all automatic programmes.
ENGLISH
15
and "00".
to set the MINUTE
to confirm.
.
Advertisement
Table of Contents
