Aansluiting Op Een Generator Groep - Connecting To A Generating Set - Generac Mobile CTF 10m Owner's Manual

Table of Contents

Advertisement

CTF 10m
13.4.2 AANSLUITING OP EEN GENERATOR GROEP - CONNECTING TO A GENERATING
SET
Controleer of de aardingsaansluiting op
correcte wijze is uitgevoerd.
De aardaansluiting van de groep moet
uitgevoerd worden met een koperen draad
met voldoende doorsnede.
De machine aansluiten op een norm
generator
groep
beveiligings-schakelaar ,
(15).
Controleer
of
de
werkingsfrequentie
overeenkomt met de spanning en de
frequentie van generator groep . Controleer
of
de
technische
generator is voldoende voor het aandrijven
van de verlichting toren.
De voedingskabel moet zo aangesloten zijn
dat het onmogelijk is deze los te trekken of
te beschadigen .
Vooraleer
de
stekker
controleren of het stopcontact niet gevoed
is (differentiële schakelaar niet aan).
In geval de generator groep van de
lichtmast
gebruikt
ruimten,
verzeker
uitlaatgassen zonder problemen in de
omgeving verspreid kunnen worden.
De fabrikant acht zich niet aansprakelijk
voor eventuele schade als de groep niet is
geaard.
met
differentiële
via
de
stekker
spanning
en
de
van
de
lampen
kenmerken
van
de
in
te
steken,
wordt
in
gesloten
u
ervan
dat
de
26
Control that the connecting to the earth is
realized in correct way.
The connecting to the earth of the generating
set must be done using a copper cable of
adequate section.
Connect the machine to a norm generating set
with ELCB protection through the plug (15).
Check that the operation tension and frequency
of the lamps corresponds to the tension and the
frequency of the generating set in use. Control
that the performances of the generating set are
sufficient to feed the lighting tower.
The connection cable must be connected in
such way that it is no possible to tear or to
damage it in any way.
Before connecting the plug control that the plug
is not feeded (earth leakage circuit breaker not
armed).
In case the generating set of the lighting tower
came used in closed places, make sure that the
exhaust gases can be dispersed without
impediments in the atmosphere.
The manufacturer is not responsible for any
damage caused by failure to earth of the
system.
TL199-01-01-01
05-03-2018
Nederlands - English

Advertisement

Table of Contents
loading

Table of Contents