Installation Manual
H3C XE 200/2000 IP PBX
Figure 5-4 XE 200 IP PBX memory card on mainboard
Figure 5-5 XE 2000 IP PBX memory cards on mainboard
Groove(s) (two for SDRAM and one for DDR SDRAM) are designed on the bottom of
the memory card to ensure the correct direction at which you insert the card. Make sure
the groove(s) are flush with the extrusion in the memory card slot on the mainboard
after you insert the card.
II. Removing memory
Step 1: Check the right position of memory on the mainboard.
5-13
Chapter 5 System Maintenance