Table of Contents
Advertisement
BOCK
®
10| Declaration of incorporation
Declaration of incorporation of partly completed machinery in accordance with
UK Statutory Instrument Supply of Machinery (Safety) Regulations 2008, Annex II 1. B
Manufacturer:
Bock GmbH
Benzstraße 7
72636 Frickenhausen, Germany
We, as manufacturer, declare in sole responsibility that the partly completed machinery
Name:
Semi-hermetic compressor
Types:
HG(X)12P/60-4 S (HC) ........................ HG(X)88e/3235-4(S) (HC)
UL-HGX12P/60 S 0,7........................... UL-HGX66e/2070 S 60
HGX12P/60 S 0,7 LG .......................... HGX88e/3235 (ML/S) 95 LG
HG(X)22(P)(e)/125-4 A ........................ HG(X)34(P)(e)/380-4 (S) A
HGX34(P)(e)/255-2 (A) ....................... HGX34(P)(e)/380-2 (A)(K)
HA(X)22e/125-4 ................................... HA(X)6/1410-4
HAX22e/125 LT 2 LG ......................... HAX44e/665 LT 14 LG
HGX12e/20-4 (ML/S) CO
UL-HGX12e/20 (S/ML) 0,7 CO
HGX12/20-4 (ML/S/SH) CO
UL-HGX12/20 ML(P) 2 CO
HGZ(X)7/1620-4 .................................. HGZ(X)7/2110-4
HGZ(X)66e/1340 LT 22........................ HGZ(X)66e/2070 LT 35
HRX40-2 CO
Name:
Open type compressor
Types:
F(X)2 ................................................... F(X)88/3235 (NH3)
FK(X)1.................................................. FK(X)3
FK(X)20/120 (K/N/TK).......................... FK(X)50/980 (K/N/TK)
Serial number:
BC00000A001 – BN99999Z999
complies with the following provisions of the above-mentioned Statutory instrument:
According to Schedule 2, part1, points 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2,
1.5.13 and 1.7.1 to 1.7.4 (excepted 1.7.4 f) are fulfilled.
Designated standards: EN ISO 12100 :2010
EN 12693
Remarks:
We also declare that the special technical documentation for this partly completed machine
has been created in accordance with Annex II, 1. B and we obligate to provide these upon
reasoned request from the individual national authorities by data transfer.
Commissioning is prohibited until it has been confirmed that the machinery into which the
partly completed machine above is to be incorporated complies with the UK Statutory
Instrument Supply machinery (Safety) regulations 2008 and an EC Declaration of Conformity,
Annex II, 1. A exists.
Authorized person for compiling and handing
over technical documentation:
Frickenhausen, 14th of October 2022
© Danfoss | Climate Solutions | 2023.06
(LT) ........... HGX44e/565-4 S CO
2
(LT)... UL-HGX44e/565 S 31 CO
2
T.............. HGX46/440-4 (ML/S/SH) CO
2
T............... UL-HGX46/440 ML(P) 53 CO
2
T H................................ HR(Z)X60-2 CO
2
Safety of machinery — General principles for design — Risk
assessment and risk reduction
:2008
Refrigerating systems and heat pumps — Safety and environmental
requirements — Positive displacement refrigerant compressors
Bock GmbH
Alexander Layh
Benzstraße 7
72636 Frickenhausen, Germany
i. A. Alexander Layh, Global Head of R&D
2
2
T
2
T
2
T (H)(V)
2
AQ452531257528en-000201 | 25
D
GB
F
E
Advertisement
Table of Contents
