Start/Stop Label - SATO CX208 Programming Manual

CX208/212 Programming Guide
Command Structure
Command Function
Input to Printer
Printer Output
Page 69

Start/Stop Label

Start Command: <ESC>A
Stop Command: <ESC>Z
Example: See above
Placement: <ESC>A must precede data
<ESC>Z must follow data
Default: None
For all print jobs, the Start command must precede the data, and the
Stop command must follow. The print job will not run properly if these
are not in place.
There is not output for these commands they are not accompanied by
other label printing commands. However, these commands must
precede and follow each print job sent to the printer.
PN 9001092 Rev. B
SATO CX208/212 Printers