SATO CX208 Programming Manual page 57

CX208/212 Programming Guide
Special Notes
Page 53
1. EX0 is effective until AR is sent to reset the printer to its standard
print length, or until the printer is repowered.
2. It may be included in an independent data stream to specify the
size of the maximum print area:
3. This command cannot be used with the <ESC>& Store Form
Overlay command.
4. The maximum print lengths with this command are
:
Maximum Print
Length
5. These commands only affect the print length. They do not change
the label width set by the <ESC>A1 Media Size command.
PN 9001092 Rev. B
CX212
4060 dots
20 in.
508 mm
SATO CX208/212 Printers
CX212
3780 dots
12.6 in.
320 mm