Enable Options - SATO CX208 Programming Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 99

Enable Options

<ESC>CLa
a = 0 Disable Dispenser Option
1 Enable Dispenser option
<ESC>CKa
a = 0 Disable Cutter Option
1 Enable cutter option
Example: <ESC>CL1
Placement: This command should be sendt in a separate data
stream.
Default: <ESC>CL0 (Dispenser Disabled)
<ESC>CK0 (Cutter Disabled)
To select the top-of-label sensing method.
Theres is no printer output as a result of this command.
1. The appropriate option must be installed before these commands
are effective.
2. Operation of the Dispenser and Cutter are dependent upon both
the <ESC>Q Quantity, the <ESC>CB Backfeed and the
<ESC>NULL (or <ESC>~) Cut commands.
PN 9001092 Rev. B
CX208/212 Programming Guide
SATO CX208/212 Printers