CX208/212 Programming Guide
Character, Proportional Spacing
Command Structure
Command Function
Printer Input
Printer Output
Special Notes
Page 28
<ESC>PS
Set to proportional spacing
<ESC>PR
Reset to fixed spacing
Example:
See above
Placement:
Preceding the data to be proportional spaced
Default:
<ESC>PS
To specify the printing of proportional or fixed spacing for
proportionally spaced fonts.
1. Once this command is sent in the data stream, it is in effect until
the end of the print job unless a reset command is sent.
PN 9001092 Rev. B
SATO CX208/212 Printers