SATO CX208 Programming Manual page 36

CX208/212 Programming Guide
Horizontal
Page 32
1. Use the Print Position commands (V and H) to locate the new
area for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axis will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable field ranges are:
aaaa
cccc
Vertical
bbbb
dddd
PN 9001092 Rev. B
CX208
0001
to
0832
0001
to
4060
CX212
0001
to
1230
0001
to
3780
SATO CX208/212 Printers