SATO CX208 Programming Manual page 39

CX208/212 Programming Guide
Special Notes
Page 35
1. Characters may be enlarged through the use of the Character
Expansion command.
2. Character spacing may be altered through the use of the
Character Pitch command. The default is 2 dots between
characters. It is recommended to use a spacing of 5 dots for
OCR-A and 1 dot for OCR-B.
3. You may also create custom characters or fonts. See the <ESC>T
Custom-Designed Characters command.
4. A font must be defined for each field to be printed. There is no
default font.
5. The proportionally spaced fonts XU, XS, XM, XL and XA can be
printed with fixed spacing using the <ESC>PS Proportional Space
command.
6. The matrices for the OA and OB fonts are scaled so that they will
remain a constant size according to the OCR-A and OCR-B
specifications when printed on different resolution printers.
OA Font 15dots W x 22 dots H
OB Font 20 dots W x 24 dots H
PN 9001092 Rev. B
CX208 CX212
22 dots W x 33 dots H
30 dots W x 36 dots H
SATO CX208/212 Printers