Off-Line - SATO CX208 Programming Manual

CX208/212 Programming Guide
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 49
Off-Line/Pause
<ESC>@
Example: See above
Placement: Anywhere in the print job between the <ESC>A and
<ESC>Z
Default: None
To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
1. You must press the READY indicator key on the front panel to
return the printer to an On-Line status .
2. Remember, when using this command, that the print job specifies
<ESC>Q10, all ten labels will print before the printer goes off-line.
3. This command will clear the print buffer.
PN 9001092 Rev. B
SATO CX208/212 Printers