Graco Dyna-Star 132220 Instructions

Instructions
Dyna-Star
System for Komatsu
Provides lubricant to operate a single line parallel automatic lubrication system. For
automatic lubrication systems only. For professional use only.
Not approved for use in explosive atmospheres or hazardous (classified) locations.
Model 132220 60 lb EDS Pump
Assembly (with Low Level)
24VDC, Injector module with pump, tube-in-tube, vent
valve, auto-fill shut off, low level, 60 lb reservoir.
Model 133812 60 lb EDS Pump
Assembly No Low Level (with dipstick)
24VDC, Injector module with pump, vent valve, dipstick,
60 lb. reservoir.
Model 826292 90 lb EDS Pump
Assembly (With Low Level)
24VDC, Injector module with pump, tube-in-tube, vent
valve, auto-fill shut off, low level, 90 lb reservoir
3500 psi (24.1 MPa, 241 bar) Maximum Working Pressure
Important Safety Instructions
See related manuals for Warnings and
installation, operation and service
instructions and when necessary,
consult your system installer. Save all
instructions.
Related Manuals
Manual Description
332514 Dyna-Star HP and HF Pump
332518 Dyna-Star HP and HF Auto-Fill Shut Off Kit
332519 Dyna-Star HP Vent Valve Kit
333393 Fill Valve
334998 Power Cable Kit
334999 Cable Harness Kit
3A2960 GLC2200 Lubrication Controller
®
HP Pump
3A7029C
EN