Personal Protective Equipment; Transport; Device Description; Device Overview - GARANT HCT User Manual

GARANT Digital dial indicator HCT
de
 Open the casing only at the battery cover to change the batteries.
 Do not make any unauthorised modifications.
en 3.4.

PERSONAL PROTECTIVE EQUIPMENT

Comply with the national and regional regulations for safety and accident prevention. Select and provide protective work
wear such as safety shoes and safety gloves appropriate for the risks associated with the intended activities.
bg
4.

Transport

Transport in the original packaging at temperatures between -10°C and +60°C. Prevent from falling.
da
5.

Device description

Digital dial indicator for measuring lengths and differences in lengths and for taking reference, flatness, positional and run-
fi
out measurements.
Digital display with additional scale.
External data transmission via proximity cable (USB), Power-RS (power USB) or via BT.
fr
External data transmission via proximity cable (USB) or via Power-RS (power USB).
6.

Device overview

it
6.1.

DIAL INDICATOR

A
hr
1 MENU button
2 SET button
lt
3 DATA button
4 Button (left)
nl
5 Button (right)
6.2.

BUTTON FUNCTIONS

no
MENU MENU
SET SET
pl
DATA
pt
Left /
ro
right
ru
6.3.

DISPLAY OVERVIEW

B
sv
11 Low battery
12 + / - display
sk
13 Keyboard lock
14 Display of 6 digits
sl
15 Hold the measurement value
16 Data transmission
es
17 Unit of measurement mm / INCH
18 Preset mode
cs
19 Scale
20 Lower limit value undershot
hu
20
Switches between the functions of the two function levels on the dial indicator. The first level con-
tains basic functions; the second contains advanced functions.
 Confirms a selection.
 Switches off the dial indicator.
 Moves to the next step within a function.
 Switches between the BT modes OFF / HID / APP.
 Transfers measurement values.
 Define the display area for the scale.
 Reduce/increase the numerical value step by step.
 Activate the setting for the nominal value and tolerance limits.
6 Clamping shank Ø8 or 3/8"
7 Ball contact point Ø2/M2.5 or 4-48-UNF
8 Lifting cap
9 Socket for proximity cable
10 Battery insert or power cable socket
21 Upper limit value exceeded
22 Tolerance indicator
23 Lower limit value of scale
24 Upper limit value of scale
25 Unit and scale graduation
26 Tolerance mode
27 MIN/MAX/DELTA mode
28 Multiplier
29 BT connection
30 Symmetrical tolerances