Yamaha Star XVS13CTD 2012 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
tomatically, and the display will return
to the prior mode after refueling and
traveling 5 km (3 mi).
To set the clock
4
1. Clock
1. Push the " " or "
"SELECT" switch to change the
display to the clock mode.
2. Push the " " side of the "SE-
LECT" switch and the "RESET"
switch together for at least two
seconds.
3. When the hour digits start flashing,
push the " " or "
"SELECT" switch to set the hours.
4. Push the "RESET" switch, and the
minute digits will start flashing.
5. Push the "
"SELECT" switch to set the min-
utes.
6. Push the "RESET" switch and then
release it to start the clock.
Self-diagnosis device
1
2
" side of the
1. Error code display
2. Engine trouble warning light "
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
will come on and the odometer/tripme-
" side of the
ter/clock display will indicate an error
code.
" or " " side of the If the odometer/tripmeter/clock display
indicates any error codes, note the
code number, and then have a Yamaha
dealer check the vehicle.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Brightness control mode
1
"
1. Speedometer panel
2. Brightness level display
This function allows you to adjust the
brightness of the speedometer panel to
suit the outside lighting conditions.
4-6
ECA11590
2