Handlebar Switches - Yamaha Star XVS13CTD 2012 Owner's Manual

To set the brightness
1. Turn the key to "OFF".
2. Push and hold the "
"SELECT" switch.
3. Turn the key to "ON", and then re-
lease the "SELECT" switch after
five seconds or more.
4. Push the " " or "
"SELECT" switch to select the de-
sired brightness level.
5. Push the "RESET" switch to con-
firm the selected brightness level.
The display will return to the odom-
eter, tripmeter or clock mode.
INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

" side of the
Left
" side of the
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch "
EAU1234B Right
1. Engine stop switch "
2. "SELECT" switch "
3. "RESET" switch
/ "
4. Start switch "
/ "
"
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the vehicle
4-7
/ "
/ "
"
EAU12400
/ "
" for the high
" for the low beam.
EAU12430
/ "
". To signal a left-hand
". When re-
4