Function Indicator On Indoor Unit Display Panel; Function Codes; Description Of Remote Control; Indicators On Remote Controller - Olimpia splendid ARYAL S1 E 10 C Instructions For Use And Maintenance Manual

Inverter
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 45

3.3 - FUNCTION INDICATOR ON INDOOR UNIT DISPLAY PANEL

(fig. K2)
The display panel shows the current setting temperature
and function code enable/disable when the air conditioner
is in operation.
In "Fan" and "Dehumidification" mode, the room
temperature is displayed.
In the case of a fault, displays the error code.

3.3.1 - Function Codes

Light for 3 seconds when:
- TIMER ON is set
- SWING, TURBO or SILENCE features are
enabled
Light for 3 seconds when:
- TIMER OFF is set
- SWING, TURBO, or SILENCE features are disabled
Lights up when the function that controls hot air in Heating mode is automatically activated.
Lights up when the air conditioner starts defrosting automatically.
Lights up when SEL CLEAN function is enabled
Lights up when FROST PROTECTION function is enabled
Lights up when WIRELESS function is enabled (if available in this model)

3.4 - DESCRIPTION OF REMOTE CONTROL

The remote control is the interface between the air-conditioner and the customer, so it is very important to
learn all its functions, the use of the various controls and the meaning of the symbols marked on it.
3.4.1 - Indicators on remote controller (fig. 33)
A. Transmission
This transmission indicator lights when remote controller transmits signals to the indoor unit.
B. Operating mode
Displays the operating mode active.
It includes: AUTO
C. Follow me Function
D. Temperature
Displays the required temperature (from 17°C to 30°C).
When you set the operating mode to FAN ONLY, no temperature setting is displayed.
E. Timer
Indicate Timer on/off time (0÷23:50 hours).
F. Fan speed
Displays the fan speed set, AUTO and three speed levels can be indicated
"
" (LOW) - "
"AUTO" is displayed when the operational mode is "AUTO" or "DRY".
G. Sleep
Displayed under sleeping operation.
Press the SLEEP button again to remove.
, COOL
, DRY
, HEAT
" (MED) - "
" (HIGH).
(fig. 33)
, FAN ONLY
and return to AUTO
ARYAL S1 E INVERTER 10-12-18-24 C
K
2
.
EN - 21

Advertisement

Table of Contents
loading

Table of Contents