Table of Contents
Advertisement
Connecting the P6300/P6500 EVA to servers and switches
Fibre Channel
You can connect the front end of the P6300/P6500 EVA FC controllers either to external Fibre
Channel switches or directly to servers. The standard host port connectivity rule is to connect even
controller ports to one fabric and odd controller ports to the other fabric. See
and
Figure 58 (page 69)
Figure 57 (page 68)
management.
NOTE:
The cabling diagrams in
connect mode, which is the default as shipped. The P6300 is shown in these diagrams, but the
port count and front-end cable placement is the same for the Fibre Channel version of the P6500.
Figure 56 Cabling the controller to front end component—Fibre Channel to switch detail view with
server-based management
1. File server
2. Management server
3. Database server
4. Fiber channel switch
5. LED status indicators for cabling connections to disk enclosures. See
for cabling connections.
All manuals and user guides at all-guides.com
for front end connections with server-based management. See
and
Figure 59 (page 70)
Figure 56 (page 67)
for front end connections with array-based
through
Figure 59 (page 70)
Figure 51 (page 62)
Connecting the P6300/P6500 EVA to servers and switches
Figure 56 (page 67)
require fabric
and
Figure 55 (page 66)
67
Advertisement
Table of Contents
