HP P6300 Enterprise Virtual Array Installation Manual page 36

Table of Contents

Advertisement

MEZ75 login: guest
Password: password
Welcome to MEZ75
******************************************************
*
*
*
*
*
******************************************************
MEZ75 #> admin start
MEZ75 (admin) #> set mgmt
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to the MGMT port.
IPv4 Interface (0=Enable, 1=Disable)
IPv4 Mode (0=Static, 1=DHCP, 2=Bootp, 3=Rarp)
IPv4 Address
IPv4 Subnet Mask
IPv4 Gateway
IPv6 Interface (0=Enable, 1=Disable)
All attribute values that have been changed will now be saved.
MEZ75 (admin) #> show mgmt
Management Port Information
-----------------------------
IPv4 Interface
IPv4 Mode
IPv4 IP Address
IPv4 Subnet Mask
IPv4 Gateway
IPv6 Interface
Link Status
MAC Address
MEZ75 (admin) #> help
General Command Set:
======================
admin [ begin | end | start | stop | cancel ]
beacon [ on | off ]
clear [ logs | stats ]
date [ <MMDDhhmmCCYY> ]
exit
fru [ restore | save ]
help
history
image [ cleanup | list | unpack ]
image cleanup
image list
image unpack [ <filename> ]
initiator [ add | rm ]
logout
passwd
ping
quit
reboot
reset [ factory | mappings ]
save [ capture | logs | traces ]
set [ alias
features
ntp
vpgroups ]
set alias
set chap
set fc [ <PORT_NUM> ]
set features
set iscsi [ <PORT_NUM> ]
set isns
set mgmt
set ntp
set properties
set snmp [trap_destinations [ <DEST_NUM> ]]
set system
set vpgroups [vpgroup index]
show [ chap
feature_keys
isns
memory
presented_initiators | presented_targets | properties | snmp
stats
show chap
show fc [ <PORT_NUM> ]
show features
36
Managing the iSCSI or iSCSI/FCoE module using HP P6000 Command View
All manuals and user guides at all-guides.com
HP StorageWorks MEZ75
pconfig
Enabled
Static
10.6.6.130
255.255.240.0
10.6.4.200
Disabled
Up
f4-ce-46-fb-0a-40
| chap
| chassis
| iscsi
| isns
| properties | snmp
| chassis
| initiators
| logs
| mgmt
| system
*
[Enabled
] 0
[Static
] 0
[0.0.0.0
] 10.6.6.130
[0.0.0.0
] 255.255.140.0
[0.0.0.0
] 10.6.4.201
[Disabled
]
| fc
| mgmt
| system
| fc
| features
| iostats
| iscsi
| luninfo
| luns
| ntp
| perf
| targets
| vpgroups ]

Advertisement

Table of Contents
loading

This manual is also suitable for:

P6500 enterprise virtual array

Table of Contents