Load Bios D; Load Setup; Ide Hdd A; Hdd Lowl - Lanner electronics AP-370VF Manual

3.8 L BIOS D
OAD
The BIOS defaults have been set by the manufacturer which represent settings provided
with the minimum requirements for your system to operate. " Load BIOS Defaults
" loads the troubleshooting default values permanently recorded in the BIOS ROM.
These settings are non-optimal and turn off all high performance features.
The Standard CMOS Setup screen is not affected. To use this feature, highlight it on
the main screen and press <Enter>. A line will appear asking if you want to load the
BIOS default values. Press the <Y> key and the <Enter>. The default settings will
load. Press <N> if you do not want to proceed.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP / PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC : Quit
F10 : Save & Exit Setup
3.9 L S
OAD ETUP
"LOAD SETUP DEFAULTS" loads the optimal settings which are stored in BIOS ROM.
The defaults loaded affect only the BIOS Features Setup, Chipset Features Setup,
Power Management Setup, PnP/PCI configuration setup and Integrated Peripherals
Setup. There is no effect on the Standard CMOS Setup. To use this feature, highlight
the entry on the main screen and press <Enter>. A line will appear on the screen asking
if you want to load the Setup default values. Press the <Y> key and then press the
<Enter> key if you want to load the Setup defaults. Press <N> if you do not want to
EFAULTS
ROM PCI / ISA BIOS (2A69KL7E)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Load BIOS Default (Y/N)? Y
Time, Date, Hard Disk Type....
D
EFAULTS
AP-370VF/F / 51
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SET\\UP
EXIT WITHOUT SAVING
: Select Item
(Shift) F2 : Change Color
AWARD BIOS SETUP