Advertisement
a
Caution! If BiDi-WiFi is inserted incorrectly, it may perma-
nently damage the control unit!
– power the automation's control unit ("Figure 6")
6
ON
– wait for the WiFi LED (A) to start flashing ("Figure 7")
7
A
– now you can choose among two different configuration, depending on
BiDi-WiFi usage.
l
Before proceeding, be sure that WiFi LED is flashing
green and Power LED is lit green. Otherwise a full reset
needs to be performed (see paragraph Full reset).
3.2.1 "MYNICE PRO" CONFIGURATION FOR THE INSTALLER
– Configure BiDi-WiFi through smartphone application MyNice Pro, fol-
lowing the instructions contained in the relevant instruction manual that
can be downloaded from this "link".
– the configuration is complete when WiFi LED (A) is fixed green ("Figure
7").
8
MyNice Pro - Android
3.2.2 "MYNICE" CONFIGURATION FOR THE END USER
– Configure BiDi-WiFi through smartphone application MyNice, adding
a new automation through WiFi.
– the configuration is complete when WiFi LED (A) is fixed green (connect-
ed to WiFi and cloud) or orange (not connected to cloud) ("Figure 7").
9
MyNice - Android
4 – ENGLISH
MyNice Pro - iOS
MyNice - iOS
4
LED SIGNALS
4
LED SIGNALS
In the event of BiDi-WiFi malfunctions, the LEDs (A) and (D) can light up
or start flashing. ("Figure 10").
A
10
The "Table 1" shows the meanings of the LED signals.
LED SIGNALS
Status
Status
WiFi LED (A)
Power LED (D)
OFF
OFF
Lit green
Lit green
Lit orange
Lit green
Flashing green Lit green
OFF
Lit green
Flashing
Flashing
orange
orange
-
Lit red
Lit red
-
Flashing red
-
D
State duration
Description
BiDi-WiFi off.
Stable
INSTALLER:
BiDi-WiFi configured
and smartphone
connected.
Stable
USER:
BiDi-WiFi configured
and connected to the
cloud
INSTALLER:
BiDi-WiFi configured
but smartphone not
connected.
Stable
USER:
BiDi-WiFi configured
and connected to
WiFi, but not to the
cloud.
BiDi-WiFi is
not configured.
Transitory
Use smartphone
(about 30
application to perform
minutes)
the accessory
configuration.
BiDi-WiFi was not
configured within 30
minutes of switching
Stable
on. Switch off and on
the accessory to retry
the configuration.
Transitory
BiDi-WiFi update in
(max 5 minutes)
progress.
System error. Contact
Stable
the Nice Technical
Assistance.
Wi-Fi module error.
Contact the Nice
Stable
Technical Assistance.
USER:
failed WiFi
connection. Check
Stable
your WiFi settings
or try "Reset WiFi"
(see paragraph WiFi
reset).
Table 1
Advertisement
