Page 1
SETUP MANUAL Konami Gaming, Inc. 585 Konami Circle Las Vegas, NV 89119-3720 P/N 810497 Rev A Phone: (866) KGI-SLOT Date of Publication: 11-22-19 Fax: (702) 361-9020...
Verify the version and options for the installed software. MAIN UNIT Make sure the installed Main Unit is the proper version (KXP, shown below). KXP is composed of KXP-ITX (game CPU board), GPU card, KXP-IOB (I/O board), and KXP-IFB (interface board).
Enable: Enable the attract mode. Setting the time interval between the attract displays. The interval setting determines how often the Konami logo is shown. If set to 1, the logo will be shown after every KONAMI ATTRACT INTERVAL time the screensaver animation plays. If set to 2, the logo will be shown every other time the screensaver animation plays;...
2. Select the art to be displayed in the topper and the duration (in seconds) to be displayed. The following options are available: KONAMI LOGO, GAME E-ART, EXTENDED GAME E-ART, EXTENDED GAME TITLE, SELEXION LOGO, NEW GAME, HOT NEW GAME, or DENOMINATION SIGN.
CRC 16 (or other) signatures for all modules. The host will then generate a CRC 16 using the same seed sent to the Konami EGM on this proposed file and compare the results with the EGM’s LP21 response.
KEY-ON CREDIT KEY-ON CREDIT The KXP Key-On Credit capability allows for an attendant to add to the player’s credit meter using a secure method. Only authorized personnel with an audit key will have access to the functionality. A transaction log provides a limited history of the most recent Key-On Credit and Attendant Paid Cancelled Credit transactions that the machine processed.
If a KXP machine is configured for Key-On Credit enabled and SAS protocol enabled, it is expected that all SAS protocol functions will perform in a typical manner; however, none of the Key-On Credit events/meters/logs data can be sent to the SAS host (casino floor system).
Page 125
Employee ID button. If an incorrect Employee ID value was typed, touch Employee ID again and correct the value. Note: The KXP machine is not able to verify a proper Employee ID is used. An Employee ID of NONE is reserved for internal use and will not be accepted for a transaction.
Need help?
Do you have a question about the KXP and is the answer not in the manual?
Questions and answers