Hotline at 1.866.KGI.SLOT. ALL RIGHTS RESERVED • Parts returned to Konami Gaming, Inc. will only be ac- Reproduction in whole or part of this manual by photographic, cepted with an RMA number. Please do NOT send any electronic or any other form of recording is prohibited by law.
(Original Instructions) OVERVIEW TERMINOLOGY This manual is for operators, technicians and Konami Gaming The term “Machine” is used throughout this manual and is service personnel. It provides useful information to aid in the defined as a physical piece of electromechanical equipment set up, operation and maintenance of the Konami Gaming, designed and manufactured by Konami Gaming, Inc.
585 Konami Circle, Las Vegas, NV, USA 89119 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
UNPACK AND INSPECT Unpack and inspect the machine before power is turned on. If the machine has been damaged during shipping, contact your Konami Distributor, or Konami Customer Service Representative, depending on warranty and sales contract terms. For Return Merchandise Authorization (RMA) information, see Section 1 of this manual.
No error messages appear when the Sub-Door is opened NOTE: To ensure proper spacing between machines, the and closed. minimum allowable width of the stand a Konami machine A Drop Door open accessed error can be detected even with can be mounted on is 28”.
Panel located on the Backplane board in the Logic Unit box and settings in the Konami Maintenance System (KMS). onnections Under typical conditions, CNB35/Port 1 on the backplane, is for interconnection to the SAS Unit, used for fiber optic interface.
CAUTION: Distributors, Operators, and Users are not to modify the equipment for any other use. Konami The following table shows the hardware that this machine Gaming, Inc. cannot be held liable for damages or injuries uses. Using incorrect hardware may damage the equipment.
Need help?
Do you have a question about the Concerto Upright and is the answer not in the manual?
Questions and answers