Table of Contents
Advertisement
3090 Version
Thermal Pad G 1.0 mm
Thermal Pad G 1.5 mm
Thermal Pad G 2.0 mm
TERMINAL METAL PLATE
M4 x 27 7984DIN SCREW
STEP 3
STEP 4
REMOVING THE TERMINAL METAL PLATE
The Metal plate attached on the Terminal is meant as a precaution,
to secure the two O-rings to prevent them from falling out of their
sockets during transport and handling. Before the installation of
the Active Backplate, this metal plate has to be removed. Unscrew
the three(3) M4 x 27 DIN7984 screws with the provided 2.5mm
Allen Key shown on the picture. Keep the screws as they will be
needed in the upcoming step, unlike the metal plate which will not
be needed anymore.
STEP 4
- 9 -
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Vector RE RTX 3080 Active Backplate D-RGB and is the answer not in the manual?
Questions and answers