Related Manuals for SMC Networks KFG2 Series
Summary of Contents for SMC Networks KFG2 Series
- Page 1 Document No. KF∗-OMV0011-A PRODUCT NAME Stainless Steel 316 Insert Fitting MODEL/ Series/ Product Number KFG2 series...
-
Page 2: Table Of Contents
Contents 1. Safety Instructions 2. Specific Product Precautions 3. Specifications 9-10 4. Troubleshooting 5. Construction 6. Applicable Fluid List 12-13 - 2 -... -
Page 3: Safety Instructions
KFG2 Series Stainless Steel 316 Insert Fitting Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) , and other safety regulations. - Page 4 KFG2 Series Stainless Steel 316 Insert Fitting Safety Instructions Caution 1. The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary.
-
Page 5: Specific Product Precautions
2. Specific Product Precautions (1) Design/Selection (3) Do not use fluids other than listed on the Warning specifications. (1) Check the specifications. Applicable fluids are air, N ,water and steam. The product in this catalog is designed to be used Please consult with SMC if using other fluids. - Page 6 2. Specific Product Precautions (2) Mounting/ Piping (3) Check the model, type and size before installation. Also, confirm that there are no scratches, gouges or cracks on the product. (4) When connecting the tubing, take pressure or possible changes to the tubing length into account, and allow a sufficient margin.
- Page 7 2. Specific Product Precautions (3) Air Supply Operating Environment Warning Warning (1) Do not use in an atmosphere having (1) Type of fluids corrosive gases, chemicals, sea water, water, Please consult with SMC when using the water steam, or where there is direct contact product in applications other than compressed with any of these.
- Page 8 2. Specific Product Precautions (4) Maintenance Tube Warning (1) Perform maintenance inspections according to the procedures indicated in the operation manual. Body If handled improperly, malfunction and damage of machinery of equipment may occur. (2) Maintenance work If handled improperly, compressed air can be dangerous.
-
Page 9: Specifications
Precautions for use with non-SMC Caution (1) When using the KFG2 series with tubing other than those from SMC, the products are not subject to warranty. 3. Specifications Specifications Note2) Note 3), Fluid Air, N ,Water, Steam Turbine oil class1 (ISO VG32) ）... -
Page 10: Troubleshooting
KFG210-P01 KFG211-P01 φ3/8” Ø12 KFG212-P01 KFG213-P01 φ1/2” Ø16 KFG216-P01 4. Troubleshooting KFG2 series insert fitting cannot be disassembled or repaired in order to quality maintenance. When failure such as "Non-removable tubing" occurs, please replace the whole product. - 10 -... -
Page 11: Construction
5. Construction Male connector Male elbow Swivel elbow Description Material Remarks Union nut Stainless steel 316 Fluorine coating Half union body Stainless steel 316 Elbow union body Stainless steel 316 Swivel elbow body Stainless steel 316 Stud Stainless steel 316 Fluorine coating O-ring Special FKM... -
Page 12: Applicable Fluid List
6. Applicable Fluid List Compatibility checklist for used materials and fluids Body Seal Body Seal Chemical Chemical SUS316 SUS316 Special FKM Special FKM ◎ × △ △ Acrylonitrile p-Xylene ○ ○ ◎ － Acetamide Citric acid ◎ × × Acetaldehyde Cumene ◎... - Page 13 Body Seal Body Seal Chemical Chemical SUS316 Special FKM SUS316 Special FKM × × × ○ Cyclohexanone Phenol × ○ × Cyclohexane Butyl phthalate － △ △ － Dichloroethylene Butyl alcohol － △ ◎ Dichlorobenzene Hydrofluoric acid [50%] △ △ ×...
- Page 14 Revision history A - : Fluid N Turbine oil class1 (ISO VG32) add 、 Applicable Tubing : TUZ add 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021 JAPAN Tel: + 81 3 5207 8249 Fax: +81 3 5298 5362 http://www.smcworld.com NOTE: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. ©...
Need help?
Do you have a question about the KFG2 Series and is the answer not in the manual?
Questions and answers