Automatic Stability Con; Trol; Automatic Stability Control - BMW Motorrad S 1000RR Rider's Manual

and then ABS warning light 2
4
changes its display behavior.
The ASC/DTC setting remains
50
unchanged.
ABS warning light lights up.
Release button 1 within two
seconds.
ABS warning light remains
on.
ABS is deactivated.
z
Activating ABS
Press and hold button 1 until
first ASC/DTC warning light 3
and then ABS warning light 2
changes its display behavior.
The ASC/DTC setting remains
unchanged.
ABS warning light goes
out; if self-diagnosis has
not been completed, it begins to
flash.
If the coding plug for the
SLICK USER
/ riding mode is
not installed, the ignition can
also be switched off and then
on again as an alternative.
If the ABS warning light
lights up after switch-
ing the ignition off and on and
then continuing driving above
the minimum speed, an ABS
fault has occurred.
min 6 mph (min 10 km/h)
Automatic Stability
Control
Deactivating ASC
Switch on ignition.
The Automatic Stability
Control (ASC) can also be
deactivated while riding.
Press and hold button 1 until
ASC warning light 3 changes
its display behavior.
ASC warning light begins to
light up.
Release button 1 within two
seconds.