Automatic Stability Control; (Asc) - BMW Motorrad R nineT Rider's Manual

ABS indicator light goes
4
out, and starts to flash if
self-diagnosis has not been com-
54
pleted.
As an alternative, the ignition
can also be turned off and then
on again.
If the ABS indicator and
warning light lights up
after switching the ignition off
and on and then continuing
z driving above the minimum
speed, an ABS fault has oc-
curred.
min 6 mph (min 10 km/h)
Automatic Stability
Control (ASC)
Deactivating ASC
Switching on ignition (
NOTICE
The ASC function can also be
deactivated while riding.
Press and hold button 1 until
the ASC indicator and warning
light 2 changes its display be-
havior.
The ABS setting remains un-
changed.
ASC indicator and warning
38).
light begins to light up.
Release button 1 within two
seconds.
ASC indicator and warning
light continues to be lit up.
ASC is deactivated.
Switch on ASC
Press and hold button 1 until
the ASC indicator and warning
light 2 changes its display be-
havior.
ASC indicator and warning
light goes out; if self-diag-
nosis has not been completed, it
begins to flash.
Release button 1 within two
seconds.