Automatic Stability Control; (Asc) - BMW Motorrad R nineT Pure Rider's Manual

ABS indicator and warning
4
light goes out; if self-diag-
nosis has not been completed,
52
the light begins to flash.
As an alternative, the ignition
can also be switched off and
then on again.
If the ABS warning light
lights up after switch-
ing the ignition off and on and
then continuing to ride above
z the minimum speed, an ABS
fault has occurred.
min 6 mph (min 10 km/h)
Automatic Stability
Control (ASC)
Switching off ASC
Switching on ignition (
NOTICE
The ASC function can also be
deactivated while riding.
Press and hold button 1 until
the ASC indicator and warning
light 2 changes its display be-
havior.
The ABS setting remains un-
changed.
ASC indicator and warning
light begins to light up.
Release button 1 within two
seconds.
ASC indicator and warning
38).
light remains illuminated.
ASC is switched off.
Switching on ASC
Press and hold button 1 until
the ASC indicator and warning
light 2 changes its display be-
havior.
ASC indicator and warning
light goes out; if self-diag-
nosis has not been completed,
the light begins to flash.
Release button 1 within two
seconds.
ASC indicator and warning
light remains off or contin-
ues to flash.
ASC switched on.