Power Cord Replacement - Graco 210ES Repair Manual

Power Cord Replacement

See Wiring Diagram, page 27.
Removal
1. Remove control board, Control Board Replace-
ment, Removal, page 18.
2. Remove green ground screw (20) and disconnect
green ground wire (G) from frame.
311990B
Installation
1. Connect green ground wire (G) to frame with green
ground screw (20). Be sure green ground wire ter-
minal faces up or wires could get caught in shroud.
2. Install control board, Control Board Replacement,
Installation, page 19.
G
Power Cord Replacement
20
25