Mounting - Weather Protection Hvc, Hvl, Alas - D+H BlueKit AIO Basic Original Instructions Manual

Mounting - Weather protection HVC, HVL, ALAS

If there is no weather protection in front
of the ventilation opening on site,
appropriate weather protection must be
correctly attached to the outer shell of
the building.
The ALAS grille can be guided through
the wall opening from the inside and
inserted into the opening.
Then pull the ALAS grille up to the outer
wall and fasten it to the wall with
mounting brackets.
Mounting - Ventilation flap JK 180, JK 190
JK-180 - Ventilation flap with spring
return motor with mounting frame for
integrated installation
JK-190 - Ventilation flap with spring
return motor for surface mounting
6x
Through bolt anchor
M8x65
10/40
AIO Basic
HVC
Weather protection roof cover
Weather protection grille
JK-180
Lay the motor connection
cable on the shaft side.
English
HVL
Louvre cover
ALAS
wall mounting
JK-190
Stick the sealing tape onto
the edge of the mounting plate.
99.829.07 1.2/06/23