Installing Pcie Expansion Card; Cooling Shroud; Removing The Cooling Shroud - Dell OptiPlex 5055 Small Form Factor Owner's Manual

5 Repeat the steps to remove any additional PCIe expansion cards.

Installing PCIe expansion card

1 Insert the expansion card into the connector on the system board.
2 Press the expansion card until it clicks into place.
3 Close the expansion card latch and press it until it clicks into place.
4 Install the:
a front bezel
b cover
5 Follow the procedure in

Cooling shroud

Removing the cooling shroud

NOTE: Cooling shroud is encompasses the processor assembly and it must be removed to access the processor.
1 Follow the procedure in
2 Remove the cover.
3 To remove cooling shroud:
a Holding the touch points, pull the fan duct bracker outwards to release the cooling shroud.
After working inside your computer.
Before working inside your computer.
Disassembly and reassembly 17