b Remove the coin cell battery from the connector on the system board [2].
Installing coin cell battery
1
Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector.
2
Press the battery into the connector until it locks into place.
3
Install the:
a
expansion card
b
cooling shroud
c
cover
4
Follow the procedure in
Optical drive
Removing optical drive
1
Follow the procedure in
2
Remove the:
a
cover
b
front bezel
c
cooling shroud
20
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.
Need help?
Do you have a question about the OptiPlex 5055 Small Form Factor and is the answer not in the manual?
Questions and answers