e
cover
4
Follow the procedure in
Speaker
Removing speaker
1
Follow the procedure in
2
Remove the:
a
cover
b
front bezel
c
2.5 inch hard drive assembly
d
cooling shroud
e
optical drive
3
To remove the speaker:
a
Disconnect the speaker cable from the connector on the system board [1].
b Press the release tabs [2], and slide the speaker module [3] out of the slot.
Installing speaker
1
Insert the speaker into the slot and press it until it clicks into place.
2
Connect the speaker cable to the connector on the system board.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
35
Need help?
Do you have a question about the OptiPlex 5055 Small Form Factor and is the answer not in the manual?
Questions and answers