HP HPE Alletra 2140 Hardware Manual page 42

b) IP address of your DNS Servers
You can list up to five DNS servers.
12. Provide the following Time information and click Next:
a) Time (NTP) Server
Type the hostname or IP address of your NTP server.
b) Time Zone
Choose the time zone the array is located in.
13. Provide Support information for the following sections and click Finish.
a) Email Alerts
From Address
This is the email address used by the array when sending email alerts. It does not need to be a real email address,
but it must be in the proper address format. Include the group or array name for easy identification.
Send to Addresses
HPE recommends that you check the Send event data to HPE Storage Support check box.
Simple Mail Transfer Protocol (SMTP) server hostname or IP address
b) Diagnostic Analysis
Checking the Send Diagnostic Analysis data to HPE Storage Support check box enabless support to monitor your
array, notify you of problems, and provide solutions.
c) HTTP Proxy
Diagnostic Analysis and software updates require an HTTPS connection to the Internet, either directly or through a
proxy server. If a proxy server is required, check the Use HTTP Proxy and provide the following information to
configure the proxy server details:
HTTP proxy server hostname or IP address
HTTP proxy server port
Proxy server user name
Proxy server password
Note: The system does not test the validity of the SMTP server connection or the email addresses that you
provide.
14. Click Finish.
A pop-up window appears with status updates and then the Setup Complete window appears.
15. Click Continue.
The OS home screen appears.
What to do next
Make sure that the Management IP address and the Controller Diagnostic IP addresses are added to your mail server's relay
list.
Firewalls should not allow inbound communications from untrusted networks or any internet addresses.
Firewalls should allow outbound communications, from the Management IP address and both Controller Diagnostic IP addresses,
to the following TCP ports and host addresses:
SSH: 2222 hogan.nimblestorage.com – For a Secure Tunnel connection to HPE Storage Support
HTTPS: 443 nsdiag.nimblestorage.com – For Diagnostic Analysis and heartbeat
HTTPS: 443 update.nimblestorage.com – For software updates
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Install the HPE Storage Array 42