HIKVISION DS-7300HI-ST Series User Manual page 196

User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR
3. Enter the information for new user, including User Name, Password, Level and User's MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration
and all operating permission in Camera Configuration.
•
Guest: The Guest user has no permission of two-way audio in Remote Configuration and only
has the local/remote playback in the Camera Configuration and local/remote log search.
•
User's MAC Address: The MAC address of the remote PC which logs onto the DVR. If it is
configured and enabled, it only allows the remote user with this MAC address to access the
DVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new user
will be displayed on the list, as shown in Figure 13.6.
Figure 13.6 Added User Listed in User Management Interface
5. Select the user from the list and then click the
in Figure 13.7.
6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
button to enter the Permission settings interface, as shown
Figure 13.7 User Permission Settings Interface
195