HIKVISION DS-7300HI-ST Series User Manual page 18

User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR
Front panel of DS-8100HDI-ST:
No. Name
1 POWER ON/OFF
2 IR Receiver
3 USB
4 DVD-ROM
ALARM
READY
5
STATUS
HDD
MODEM
TX/RX
GUARD
Channel Status
LED Indicators &
6
Alphanumeric
Buttons
ESC
REC/SHOT
PLAY/AUTO
ZOOM+ Button
A/FOCUS+
EDIT/IRIS+
Figure 1.2 DS-8100HDI-ST Front Panel
Table 1.2 Description of Front Panel
Function Description
Power on/off switch.
Receiver for IR remote control.
Connect to USB mouse or USB flash memory devices.
Slot for DVD-ROM.
Alarm indicator turns red when a sensor alarm is detected.
Ready indicator is normally blue, indicating that the DVR is functioning properly.
Indicator turns blue when DVR is controlled by an IR remote.
Indicator turns red when controlled by a keyboard and orange when IR remote and
keyboard is used at the same time.
Indicator does not light when the DVR is controlled by the IR remote control with
the address of 255.
HDD indicator blinks in red when data is being read from or written to HDD.
Reserved.
TX/RX indictor blinks in blue when network connection is functioning properly.
Indicator turns blue when the device is armed;
Indicator does not light when the device is disarmed;
The arm/disarm state can be initiated by pressing and holding on the ESC button
for more than 3 seconds in live view mode.
Switch to the corresponding channel in Live View or PTZ Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in All-day Playback mode.
The light of the button is blue when the corresponding channel is recording; it is
red when the channel is in network transmission status; it is pink when the channel
is recording and transmitting.
Exit and back to the previous menu.
Arm/disarm the DVR in live view mode.
Enter the Manual Record interface.
Turn audio on/off in Playback mode;
In PTZ control mode, pressing the REC/SHOT button and a Numeric button will
call a PTZ preset.
Enter the Playback menu;
Auto scan in the PTZ Control mode.
In PTZ control mode, the ZOOM+ button is used to zoom in the PTZ camera.
Adjust focus in the PTZ Control mode.
Switch between input methods (upper and lowercase alphabet, symbols and
numeric input).
Edit text fields. When editing text fields, it will also function as a Backspace button
to delete the character in front of the cursor.
On checkbox fields, pressing the button will tick the checkbox.
17