Table of Contents
Advertisement
User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR
6. You can click the Copy button to copy the privacy mask settings of the current camera to other cameras.
Please refer to step 7 of Chapter 11.1 Configuring OSD Settings.
7. Click the Apply button to save the settings.
11.3 Configuring Video Parameters
Steps:
1. Enter the Image Settings interface.
Menu > Camera > Image
2. Select the camera to set image parameters.
3. Select the mode from the dropdown list of Mode. Five modes are selectable: Standard, Indoor, Dim Light,
Outdoor and Customize.
4. When the mode is selected to Customize, you can adjust the video parameters, including Brightness,
Contrast, Saturation and Hue, as shown in Figure 11.6.
Figure 11. 4 Set Privacy Mask Area
Figure 11.5 Image Settings Interface
177
Advertisement
Table of Contents
