Backup / Restore Procedure; Backup - Riello RS 160/E BLU Installation, Use And Maintenance Instructions

6.9

Backup / Restore procedure

At the end of the "Start-up procedure" it is opportune to make a
backup, creating a copy of the data memorised on the REC, in
the display panel RDI 21.
This will allow the data be used to programme a new REC or to
return to the memorised settings of the same REC.
6.9.1

Backup

To perform the backup, proceed as follows:
 access the Parameters Level referring to "Access proce-
dure with password" at page 38.
The display screen displays the parameters group 400 .
P
With the key "-" :
Select the parameters group 000 :
P
The 000 parameter blinks, confirm using the "i/reset" key:
The display screen shows parameter 050 blinking:
P
Confirm with the key "i/reset" :
The parameter bAC_UP appears on the display screen:
P
Start-up, calibration and operation of the burner
V h min s
%
h min s
%
/reset
h min s
%
/reset
h min s
V
%
We suggest carrying out this operation at the end
of each intervention that modifies what has been
set on the cam.
WARNING
This will allow a restore to be easily carried out on
a new cam supplied as a replacement part, with-
out having to reprogramme the system.
confirm with the key "i/reset" :
The display screen shows the following value:
P
Use the button "+" :
The value will be set to 1 . Value 1 is flashing:
P
confirm with the button "i/reset" to activate the backup process.
The value 1 appears on the display screen:
P
After approx 5 seconds (it depends on the duration of the pro-
gramme), the 0 value appears on the display screen, this is to in-
dicate that the backup process has been completed correctly.
P
43 GB
/reset
V h min s
%
V h min s
/reset
V h min s
%
V h min s
%
20067467