6.8
Backup / Restore Procedure
When the "Start-up procedure" on page 32 has been
completed, make a backup, creating a copy of the data stored on
the BT, in the UI display panel.
This will allow using data to program a new BT or going back to
the stored settings of the same BT.
We suggest performing this operation at the end
of each action involving cam setting editing.
This will allow to easily restore a new cam
supplied as a spare part, without having to
WARNING
reprogram the system.
6.8.1
Backup
Proceed as follows to perform the backup procedure:
access the Parameter Level by referring to "Password
access procedure" on page 31.
The display shows the screen.
Select the Backup-restore menu icon.
20171664
E-display control
Select the Backup icon.
S9994
S9969
Press the ENTER key.
S9972
36
GB