Start-Up; Use; Turning The Appliance On/Off; Setting The Dhw Temperature - Bosch Tronic 2000T User And Installation Manual

Use

CAUTION:
Electrical protection!
▶ The appliance should dispose of an
independent connection to the DB
board (electric board), protected by a
30 mA differential circuit breaker and
earthing.
The electrical connection must be realized in
accordance with the current country laws
regarding electrical installations.
▶ Connect the appliance via a socket with earth connection.
5.5

Start-up

▶ Verify that the appliance has been correctly installed and
assembled.
▶ Open the water inlet valves.
▶ Open all the hot water taps in order to ensure all the air is
out of the connections.
▶ Control the tightness of all the connections and ensure that
the appliance fills to its full capacity.
▶ Connect the appliance to the electric current.
▶ Inform the customer of any user information of the
appliance and handling.
6 Use
2
Fig. 11 User interface
[1] Operating light
[2] On / Off switch
[3] Temperature selector
12
1
3
6720821791-03. V 2
CAUTION: The first start-up of the appliance
must be carried out by an authorized
technician, which will provide the user with
all the necessary information to the best
working and handling of the device.
6.1

Turning the appliance on/off

Turn on
▶ Switch to „I".
Turn off
▶ Switch to „0".
6.2

Setting the DHW temperature

Once the water has reached the selected
temperature level, the appliance stops
heating up (the indicator switches off).
When the water temperature is below the
desired value, the appliance re-starts the
heating cycle (the indicator switches back
on) until it reaches the desired temperature
selected.
The water outlet temperature can be regulated until 70 °C.
Increasing the temperature
▶ Turn the temperature selector to the right.
Decreasing the temperature
▶ Turn the temperature selector to the left.
6.2.1 „Anti-Frost"-mode -
In this mode, the hot water tank always starts, when the
temperature inside the hot water tank reaches 5 °C.
▶ Switch to „-".
6.3

Emptying the appliance

▶ Turn off the appliance from the electric supply.
DANGER: Burn risk!
Open a hot water tap to and verify the
temperature of the water in the appliance
before opening the safety valve.
▶ Wait until the water temperature
decreases in order to avoid burns or any
other damage.
▶ Switch off the water cutting valve and open a hot water tap.
▶ Open the safety valve (Fig. 12).
Tronic 2000T – 6 720 885 113 (2021/08)