EIP HGR1500 User Manual page 3

Thank you for deciding to purchase an Ebac dehumidifier. Like the many tens
of thousands of people who have already bought an Ebac dehumidifier we are
confident you will find it is the most effective answer to the problem of
condensation and dampness related problems
Carefully remove the HGR1500 dehumidifier unit from its transit box and
visually check for signs of transit damage. If there is evidence of damage DO
NOT attempt to operate the unit, call your supplier for advice. Do not discard
the packing; it will be useful when transporting the dehumidifier unit in the
future. Your dehumidifier is packed in a plastic wrapping, please ensure that it
is disposed of safely and where it will not be a danger to children.
This user manual tells you how to use the HGR1500 dehumidifier. Please
read it thoroughly before operating the dehumidifier. If you have any questions
about the unit please contact our Customer Services Department at the
address shown at the back of the section or phone 01388 664400.
Dehumidifiers remove moisture from the air circulating through it.
Continuous operation reduces the relative humidity the air and this helps
prevent rust, rot, mould, mildew and condensation.
The HGR1500 dehumidifier consists of an air to air heat exchange, motor,
compressor unit, a refrigerant condenser and air circulating fan, a refrigerated
surface, a means for collecting and disposing of the condensed moisture and
a cabinet to house these components.
The HGR1500 dehumidifier must only be stored and transported in the
horizontal position. To operate, stand the unit on level ground, and connect
power supply and it is ready for operation.
When a generator is used to supply the power, it is essential to check the
minimum kva required in the technical section within this manual. The
generator must be started before connection is made to the dehumidifier.
UNPACKING
INTRODUCTION
GENERAL
Page 3 of 12
Drawing : - TPC413
Issue : - 1
Date : - 22/01/14