Removing The Rubber Feet; Installing The Rubber Feet - Dell OptiPlex 5260 Service Manual
Hide thumbs
Also See for OptiPlex 5260:
- Stand installation manual (19 pages) ,
- Setup and specifications manual (45 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
Removing the rubber feet
1
Follow the procedure in
2
Remove the Stand.
3
Pry the rubber feet at the bottom edge from the display assembly base and pull it out.
Installing the rubber feet
1
Align the rubber feet with the slots on the display assembly base and push it firmly in place.
18
Removing and Installing components
Before working inside your
computer.
Advertisement
Table of Contents
