Removing The Rubber Feet; Prerequisites; Procedure - Dell Inspiron 20 3000 Service Manual

Removing the rubber feet

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the stand.
2 Follow the procedure from step 1 to step 2 in
3 Remove the back
4 Follow the procedure from step 1 to step 4 in
5 Remove the system-board
6 Remove the fan.
7 Remove the heat
8 Remove the memory
9 Remove the speakers.
10 Remove the wireless
11 Remove the system
12 Follow the procedure from step 1 to step 6 in

Procedure

1 Remove the screws that secure the rubber feet to the display bezel.
80
computer. After working inside your computer, follow
After working inside your
cover.
shield.
sink.
module.
card.
board.
computer. For more safety best
www.dell.com/
"Removing the optical
"Removing the hard-drive".
"Removing the display
Before
drive".
assembly".