Removing The Rubber Feet; Prerequisites; Procedure - Dell Inspiron 20-3052 Service Manual

Removing the rubber feet

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stand.
2 Follow the procedure from step 1 to step 2 in
drive".
3 Remove the
4 Follow the procedure from step 1 to step 4 in
5 Remove the
6 Remove the fan.
7 Remove the
8 Remove the
9 Remove the speakers.
10 Remove the
11 Remove the
12 Follow the procedure from step 1 to step 6 in
assembly".

Procedure

1 Remove the screws that secure the rubber feet to the display bezel.
back cover.
system-board shield.
heat sink.
memory module.
wireless card.
system board.
computer. After working inside your
After working inside your
"Removing the optical
"Removing the
"Removing the display
hard-drive".
77