Table of Contents
Advertisement
Backguard Installation
PRD364JDGU
PRD364JDGC
PRD366JGU
PRD366JGC
PRD486JDGU
PRD486JDGC
PRD48JDSGU
PRD48JDSGC
NOTE: If a backsplash is to be used in addition to a
backguard, install the backsplash first and the backguard
second before sliding range into place.
High Shelf Parts Included
(1) High Shelf top panel
(1) High Shelf front panel
(13) T-20 Torx Stainless screws
(16 or 14) T-20 Torx drill point screws
(1) Installation Guide
Low Back Parts Included
(1) Low Back panel
(9 or 8) T-20 Torx stainless screws
(8 or 6) T-20 Torx drill point screws
(1) Installation Guide
Tools Needed
T-20 Torx head screwdriver or drill
Protective Work Gloves
AVAILABLE FOR THESE PRO GRAND
Pro Grand 36" Dual Fuel Range 4 Burner Griddle
Pro Grand 36" Dual Fuel Range 4 Burner Griddle - Canadian
Pro Grand 36" Dual Fuel Range 6 Burner
Pro Grand 36" Dual Fuel Range 6 Burner - Canadian
Pro Grand 48" Dual Fuel Range 6 Burner Griddle
Pro Grand 48" Dual Fuel Range 6 Burner Griddle - Canadian
Pro Grand 48" Dual Fuel Range w/ Steam Oven
Pro Grand 48" Dual Fuel Range w/ Steam Oven - Canadian
®
DUAL FUEL MODELS:
WARNING:
To reduce the risk of fire or injury to persons, check to
make sure all packaging has been removed from
accessory devices before use.
WARNING:
Fingers or hands could get pinched when installing the
backguard. Severe injury could result. Use extreme
caution and wear thick protective gloves to avoid
potential laceration to finger or hand while sliding the
backguard down onto the range.
CAUTION:
The High Shelf can get very hot! DO NOT place the
following items on top of the High Shelf:
•
plastics or containers that can melt
•
flammable items.
•
a total load over 30 pounds (13.6kg)
High Shelf
Low Back
Figure 24: High Shelf & Low Back Front View
English 23
Advertisement
Table of Contents
