Install The Rimage Software - Rimage DL5200 Setup And Installation

5
Connect the DL5200 cables.
a. Connect the USB cable from
the DL5200 to the PC USB port.
6
Install the front cover.
3
b. Connect the FireWire cable from the
DL5200 to the PC FireWire port.
7

Install the Rimage Software.

Important! You must have administrative privileges to

install the software on the PC.
a. Power on the PC.
b. Place the Rimage software CD in the PC disc drive.

Note: If the software installation does not start automatically,
navigate: Start > Run and browse to the Setup.exe file on the
software CD.
c. Follow the onscreen prompts to complete the software installation.
c. Connect the power cord from the
DL5200 to a power outlet.
Important! Do not power

on the DL5200 until you are
instructed to do so.
110797_C