Rimage DL5200 Setup And Installation page 2

3
Set up your printer.
a. Unpack the Everest printer.
Refer to the Everest Unpacking
and Setup Instructions included
with your Everest printer.
4
Connect the printer cables.
a. Connect the short
power cord from
the DL5200 to the
printer.
2
Ribbons
Foam
Guide
Printer
Foam
Box
b. Connect the printer
cable from the DL5200
to the printer.
b. Place the printer on the
DL5200 so that the plastic feet
slide into the slots on the printer
plate.
Printer plate
Slots for feet
c. Connect the D-shaped cable from the
DL5200 to the printer as indicated by the
D-shaped label.
110797_C