Advertisement
6. Make sure that you can pull the saw chain
round freely by hand and that it does not
sag.
Saw chain filing and saw chain combinations
Saw chain
Chain type
Round file
size
H30
3/16 in. / 4,8
mm
H37
5/32 in. / 4,0
mm
To do a check of the saw chain lubrication
Do a check of the chain saw lubrication each
time you refuel.
1. Start the product and let it run at 3/4 speed.
Point the nose of the guide bar at a light
color surface almost 20 cm (8 in) away.
2. After 1 minute of running, a line of oil
shows on the light surface.
3. If you cannot see the line of oil after 1
minute, clean the oil channel in the guide
bar. Clean the groove in the edge of the
guide bar. Make sure the guide bar nose
sprocket turns freely and that there are no
blockages in the lubrication hole. Clean
and lubricate the tip sprocket.
30
To lubricate the cutting equipment
Side plate an-
Top plate an-
gle
gle
60°
30°
60°
30°
4. Start the product and let it run at 3/4 speed.
5. After 1 minute of running, a line of oil
6. If you cannot see the line of oil after 1
File guide an-
gle
10°
0°
Point the nose of the bar at a light color
surface almost 20 cm (8 in) away.
shows on the light surface.
minute, speak to your approved dealer.
Depth gauge
setting
0,025 in. /
0,65 mm
0,025 in. /
0,65 mm
653 - 006 - 10.02.2020
Advertisement
