Windows 2000 Configuration; Configuring Windows 2000; Printing Without Using A Print Server; Printing With A Standard Tcp/Ip Port - Ricoh AFICIO AP306 Setup Manual

Configuring Windows 2000

Printing Without Using a Print Server

The following procedure describes how to configure Windows 2000 to use the
printer on a network without a Windows 2000, Windows NT Server, Windows
NT Workstation or NetWare based print server.
indicates topics explained in this document
1. Decide on the protocol to use
Consult your network administrator about which of the three protocols are appropriate.
TCP/IP
2. Configure the chosen protocol
"Configuring TCP/IP and IPP for Printing"
3. Select the appropriate software
If using TCP/IP ...
PortNavi
4. Install the software and set the printer driver port
"Using PortNavi"

Printing with a Standard TCP/IP Port

Standard TCP/IP port is a standard port of Windows 2000 to enable Peer-to-
Peer printing in a network environment.
For more information about Standard TCP/IP port settings, see Windows 2000
Help.
2. Windows 2000
Configuration
IPP
I f u s i n g I P P o r N e tB E U I . . .
Multidirect Print
"Using Multidirect Print"
NetBEUI
"Configuring NetBEUI
for Printing"
Draft 2000/06/22
15