Download Print this page

M Design Luna 850 V GOLD GAS Instructions For Installation And Use Manual

Advertisement

Quick Links

LUNA 850 V GOLD GAS
INSTRUCTION FOR INSTALLATION AND USE
Passion for fire

Advertisement

loading
Need help?

Need help?

Do you have a question about the Luna 850 V GOLD GAS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for M Design Luna 850 V GOLD GAS

  • Page 1 LUNA 850 V GOLD GAS INSTRUCTION FOR INSTALLATION AND USE Passion for fire...
  • Page 2 SUMMARY 1. GENERAL REMARKS ......................3 2. CONNECTION ..........................3 3. SPECIFICATION SHEET ......................4 4. ASSEMBLY OF THE CHIMNEY ....................5-7 5. ELECTRICAL CONNECTION ....................8 6. INSULATION AND FINISHING ...................8 7. POSITIONING THE LOGS, DIAMOND, SAPPHIRE AND WHITE PEBBLES ..9 8. FIRST-TIME USE…......…………………………………………......10 9.
  • Page 3 1. GENERAL REMARKS This is a moulding of the closed combustion system, designed for the atmosphere and comfort of your living-room. It constitutes an efficient source of heat and gives the impression of a real chimney fire. The gas with air-vent furnaces are based on the principle of natural extraction from the furnace, which eliminates flue gas outside and brings in air (oxygen) from outside the house which is necessary for combustion of the gas.
  • Page 4 3. SPECIFICATION SHEET LUNA 850 V Gold gas Type of Gas NATURAL GAS BUTANE-PROPANE / LPG Category 3B/P Category Type Entry pressure (mbar) 28-30 Burner pressure (mbar) 23.8 19,3 28,2 1.132 0,789 0,344 0,389 0,389 0,295 Consumption (m Burner injector Fr./Re.* 6 x 0,80 / 6x0.75...
  • Page 5 4. INSTALLING THE CHIMNEY The only authorised pipes are ONTOP Metaloterm™. Between the external wall of the pipe and the wall or the ceiling, you should anticipate for an interstice of at least 50mm and protection that is suitable against temperatures of around 130°C.
  • Page 6 Fig. 2 ROOF EXIT VIA EXISTING CHIMNEY (C AARDGAS TAB. 1  150(min) Ø 100 Toestel / Appareil C (min) C (max) Restriction HR+ (from 4m) LUNA 850 V Ø 60 TAB. 2  200(min) Ø 130 Toestel / Appareil C (min) C (max) Restriction HR+ (from 3m)
  • Page 7 Fig. 3 WALL EXIT (C Ø 150/100* Appliance A (min) B (min) B (max) Restriction HR+ LUNA 850 V 1,25m wall exit A+0,5m Ø 75 * with reduction part USVK13 on the appliance (A) Ø 200/130 in combination with. Ø 150/100* Appliance A (min) B (min)
  • Page 8 Fig. 1 ROOF EXIT with 90° bends Ø 150/100* Appliance A (min) B (max) C (min) (A+B+C )max LUNA 850 V 1,25 m * with reduction part USVK13 on appliance Ø 200/130 Appliance A (min) B (max) C (min) (A+B+C )max LUNA 850 V 1,25 m (A+C) + 7m...
  • Page 9 The built-in part of the furnace tends to be very warm. Please check that the furnace is not too narrowly fi�ed and that there is adequate space for the elimination of hot air. For insulation of the furnace, we advise you to use M Design insulating plates. You are advised against using any other insulation product.
  • Page 10 7. PUTTING IN PLACE THE LOGS, DIAMOND, SAPPHIRE AND WHITE STONES • Please check that the pilot light is switched off and that the furnace has cooled down. • Move the window to the front by pulling it. The window tips open at 45°. •...
  • Page 11 After the first few fires, a light deposit may appear on the window. It comes from the paintwork. Once the furnace is cold you can get rid of this de- posit by using M Design’s Bio-Clean cleaning product. This product may be used later on for cleaning the window.
  • Page 12 10. GUARANTEE This page is your warranty card. The guarantee is only valid for faults caused by construction defects or defects in the parts used to build the furnace. M-Design offers a 12 month guarantee on all electronic parts and a 6 year guarantee on the furnace construction. Caution: The following items are always excluded from the guarantee: The glass, door, joints and internal decor.